ALUFLOR Construction Group

KerAion Quadro

DruckKerAion Quadro

For decades, buildings all around the world have been successfully cladded with facade systems of AGROB BUCHTAL. Apart from the typical advantages of the ceramic material, it is above all the sophisticated technique which speaks in favour of KerAion: KerAion facades are conforming to standards, to official approvals and – thanks to their practically unlimited durability – very economical.

2156456464454

With a well balanced range of colours, diverse sizes and project-specific special productions, KerAion facade systems give buildings with large surfaces an individual and aesthetic look. Compared to the board formats of the KeraTwin® systems, square large-size formats from 60 x 60 up to 120 x 120 cm with a panel thickness of only 8 mm are also available in the case of KerAion.

KerAion K8 with visible clamp fastening

System description
The KerAion facade panels are fixed on the substructure by means of the stainless steel clamps K8. The colour of the clamp lips is matched to the panel design. To prevent clattering and constraining forces in the case of alternating wind loads, the facade panels are installed on the substructure in a nonrigid way by means of foamed pieces.

23_2_GB

Essential system advantages

  • Rapid and proven panel installation with well thought-out system components
  • The low panel weight of 18 kg/m² facilitates transport and handling and also permits the use in case of a statically demanding building structure
  • Suitable for use both on metal and wooden substructure
  • Great design scope thanks to a wide variety of sizes up to 90 x 90 cm
  • General approval of the supervisory authority by the “Deutsches Institut für Bautechnik”, Berlin: no. Z-33.1-18

KerAion Quadro with invisible fastening (clasps / bearing profile)

System description
Quadro fastening points (ceramic composite element) with integral stainless steel screw are sinter-fused on the reverse side of the KerAion Quadro facade panels in a special firing process. On these fastening points, clasps (up to the size of 60 x 90 cm) or a bearing profile (up to the size of 120 x 120 cm) can be screwed by means of which the facade panels are hung in the substructure.

23_1_GB

Essential system advantages

  • No visible fastening means
  • No weakening of the facade panels by undercut anchors
  • The low panel weight of 18.5 kg/m² facilitates transport and handling and also permits the use in case of a statically demanding building structure
  • Great design scope thanks to a wide variety of sizes up to 120 x 120 cm
  • Excellent look of the facade thanks to a particularly uniform joint structure
  • General approval of the supervisory authority by the “Deutsches Institut für Bautechnik”, Berlin: no. Z-33.1-21 Fastening with clasps, no. Z-33.1-27 Fastening with bearing profiles